Definition, Betydelse, Synonymer & Anagram | Engelska ordet BEVEL

Definition av BEVEL

1. avfasad, lutande, skev, sned, krum, krokig
2. avfasning, lutning, fas, kon, gering, sluttning
3. avfasa, avslipa, facettera, fasettera, kanthugga, luta, snedda, snedhugga, snedslipa, gera
4. slutta, ligga på sned
5. mäta med smygvinkel
6. (redskap) skevmall, smygvinkel, vinkelmått

Exempel på hur man kan använda BEVEL i en mening

• On one type, one side is flat, and the other side beveled, a basilled edge, also called a side axe, single bevel, or chisle-edged axe.
• Power then went to a longitudinal drive shaft in the center of the frame that drove the outboard axle on each powered truck through bevel gears in an enclosed gearcase riding on the axle between the truck frames.
• Beveled glass is usually made by taking thick glass and creating an angled surface cut (bevel) around the entire periphery.
• A block plane is a small metal-bodied woodworking hand plane which typically has the blade bedded at a lower angle than other planes, with the bevel up.
• Nonstick properties: The back face (urasuki) is concave to easily detach the blade from the substance being cut, and the front bevel (shinogi) allows sliced piece to be easily removed from the blade after cutting.
• The grind of a blade should not be confused with the bevel forming the sharpened edge; it more usually describes the overall cross-section of the blade, not inclusive of the beveled cutting edge which is typically of a different, less acute angle as the bevel ground onto the blade to give it a cross-sectional shape.
• Wood siding in overlapping horizontal rows or "courses" is called clapboard, weatherboard (British English), or bevel siding which is made with beveled boards, thin at the top edge and thick at the butt.
• File:De overwinning op de Spanjaarden bij Gibraltar door een vloot onder bevel van admiraal Jacob van Heemskerck, 25 april 1607 Rijksmuseum SK-A-1387.
• Moody used a system of overhead pulleys and leather belting, rather than bevel gearing, to power his machines.
• More advanced protractors, such as the bevel protractor, have one or two swinging arms, which can be used to help measure the angle.
• Abundant fragments of stone "pot-boilers" and bevel ended bone tools indicate that the shellfish were being cooked and the contents scooped out.
• The shaft drives a bevel gear to which the wheel is joined via a cush-drive, which absorbs and dampens driveline shocks and vibrations.
• Most lubricants for manual gearboxes and differentials contain extreme pressure (EP) additives and antiwear additives to cope with the sliding action of hypoid bevel gears.
• The FV600 used a version of the DAF H-drive, with a single differential between sides and all wheels on each side linked by an internal driveshaft and bevel gearboxes to the half shafts.
• Normally the work piece is held flat on the table and so table swiveling will produce a miter cut (blade vertical and angled across work piece), head rotation a bevel cut (blade angled from vertical and square across work piece), and in combination a compound cut.
• The upper outer edges of the baulks were beveled at 45 degrees, and the rails fixed to the bevel surfaces so as to be angled out at the same inclination.
• The words bevel and chamfer overlap in usage; in general usage, they are often interchanged, while in technical usage, they may be differentiated as shown in the image on the right.
• Power was transmitted to the rear wheels using an open driveshaft, a hypoid bevel final drive, and Hotchkiss drive, replacing the torque tube from a remotely mounted gearbox used on earlier 40/50 hp models.
• The pitch surfaces of meshed external bevel gears are coaxial with the gear shafts; the apexes of the two surfaces are at the point of intersection of the shaft axes.

Förberedelsen av sidan tog: 149,36 ms.