Anagram & Information om | Engelska ordet REEFING

Exempel på hur man kan använda REEFING i en mening

• Disadvantages of the rig include the limited deck space around the mast, which can be problematical when raising or lowering sail, or when reefing; halyards are often led back to the cockpit, so partially mitigating this problem.
• The X-23's recovery parachute deploys properly for the first time and two of the recovery aircraft locate it, but its reefing cutters fail to actuate, making it dangerous to attempt to bring the X-23 aboard one of the JC-130Bs.
• These cars were eventually decommissioned and trucked to Sims Metal Management in Newark, New Jersey, from April 2013 to October 1, 2013, for scrapping, as the reefing program had ended in April 2010.
• Minor spacecraft design deficiencies in the parachute reefing cutters, the drogue and main parachute deployment mortar mountings, and the command and service module umbilical cutters were found and corrected before the crewed Apollo flights began.
• During an inspection fly-by of the descending parachute system it was seen that reefing cutters had failed to actuate.
• This attachment point has to be varied if the sail is reefed, so reefing can only be done by completely lowering the sail, moving position of the halyard and re-hoisting once the reef points are tied.
• The mainsail had to be smaller to clear this stack (this could be achieved by reefing), and the foresail would be sheeted to a temporary wire horse.
• In a mainsail, pairs of grommets, called reefing tacks, reefing clews, or reefing cringles may be installed in the sail; a cruising boat will typically have two to three pairs.
• Finally, in July 2007, the car was moved to the SBK yard for asbestos abatement and sent to the 207th Street Yard for reefing in early 2008.
• The mining licenses awarded cover a variety of activities, including exploration (prospecting and retention), mining (small, medium, and large scales), processing, smelting, and reefing, as well as mineral business (dealer's and broker's) licenses.
• This is typically accomplished by reefing the main and either rolling up a portion of the headsail on a furler, or changing to a smaller headsail.
• For sailing the design is equipped with internal boom slab reefing, a 4;1 mechanical advantage mainsheet block, a backstay and a boom vang.
• The best way to reduce rounding up in an over-canvassed boat, is to reduce sail by reefing, lowering or furling.
• Although staysail roller-furling is effective and very common, in-mast or in-boom mainsail furling involves some compromises, and mainsail slab reefing gives a better sail shape.
• The change commences where the Sideling Gold Mining Company has erected its great waterwheel, and is at work reefing and ground sluicing.
• Lazy jacks (or lazyjacks) are a type of rigging which can be applied to a fore-and-aft rigged sail to assist in sail handling during reefing and furling.
• The change commences where the Sideling Gold Mining Company has erected its great waterwheel, and is at work reefing and ground sluicing.
• In the Age of Sail, a position at the Weather Earing (the earing at the windward side of the ship) was considered a place of honor for the topmen, and on a merchant ship was the position of the second mate during reefing.
• It combines a traditional GRP hull and foam sandwich deck moulding with a modern asymmetric rig including a furling jib, reefing mainsail and single line gennaker hoist system.
• Equipped with the first known fitting of Appledore roller reefing, the sails are reefed by a ratchet lever that engaged the cogs on the Gaff boom, thereby winding the sail around it, and then locked to prevent the sail unwinding from the boom.

Förberedelsen av sidan tog: 394,04 ms.